Accessories
-
Accessories, Mounts
VideoTec NXM36D0000 Outdoor Housing
The NXM36 housing has been developed for installations in highly corrosive areas such as industrial chemical, petrochemical, marine, naval and offshore platforms; entirely made from electropolished and passivated AISI 316L stainless steel for maximum protection against deterioration. The IP66/IP67/IP68/IP69 level guarantees complete protection against bad weather and water immersion.
SKU: n/a -
Accessories, Lenses
Theia Varifocal Lens CS 1.8-3 MM DC-IRIS
Designed for ultra-wide field of view
- Optical distortion correction by Theia’s Linear Optical Technology®
- IR-corrected lens
- F-number 1.5
- Focal length 1.8–3 mm
- Supports sensors up to 1/2.7″
Theia Varifocal Ultra Wide Lens 1.8-3.0 mm lens incorporates patented Linear Optical Technology® which enables an ultra-wide field of view without barrel distortion. It is a varifocal lens, which lets you optimize the field of view from wide angle to ultra-wide. The rectilinear design of the lens enhances the resolution at the edges of the image, increasing the probability of detection.
The lens is IR-corrected. This means that you don’t need to adjust the camera’s focus when you shift between day and night mode using the IR-cut filter.
SKU: 7331021036611 -
-
-
-
Accessories, Network Switches
Ex Connection Rail 8-port PoE++ Switch
Explosion-protected PoE++ switch for use with up to 8 cameras, certified for use in hazardous areas according to ATEX and IECEx, in an Ex d copper free and sea water resistant aluminum enclosure. Model name: T04.6-D.BOR-8PoE++-1000BaseXX. Ex II 2G Ex d IIC [op pr] T5 Gb, Ex II 2D Ex t IIIC T95°C Db IP66, operating temperature -60°C to +50°C. Input voltage 100 VAC – 240VAC, network uplink 2x 10BASE-T/100BaseTX/1000BASE-T, 2x SFP, network output 8x PoE++ IEEE802.3at/bt, max 60W/port).
SKU: 7331021083035 -
Accessories, Mounts
AXIS TW8100 Rack Mount
The AXIS TW8100 Rack Mount is an accessory that makes it possible to conveniently place multiple AXIS W800 System Controller’s in a 19-inch rack. This mount therefore enables easy placement of the Axis body worn system’s controllers in a server room with controlled physical access and operational environment.
SKU: 7331021075870 -
Accessories, Controls
AXIS TU9003 Keypad
With AXIS TU9003 Keypad, you can quickly navigate between workspaces, cameras, views, and PTZ presets. It has 10 application-defined hotkeys and 12 preset keys. It’s equipped with an LCD display allowing the operator to see, for instance, the number of the camera he or she is looking at. The keypad is constructed in durable materials that are PVC free and has a professional and modern look that adapts to a surveillance room design. It is designed for both left-hand and right-hand use and is easy to install with a USB interface.
SKU: 7331021078109 -
Accessories, Controls
AXIS TU9002 Joystick
AXIS TU9002 Joystick gives responsive and accurate control of all Axis PTZ cameras. It is a 3-axis joystick with a turn knob and six application-defined hotkeys. Plus, you can use AXIS TU9002 as a computer mouse. The joystick is constructed in durable materials and has a professional and modern look that adapts to a surveillance room design. It is designed for both left-hand and right-hand use and is easy to install with a USB interface.
SKU: 7331021078093 -
Accessories, Controls
AXIS TU9001 Control Board
AXIS TU9001 Control Board is a modular system with separate joystick and keypad units. The modular system allows you to choose a simple solution such as only the joystick, or a complete solution with the two modules for both camera and video management.
SKU: 7331021078086 -
Accessories, Cables
AXIS TU8011 4-Port PoE Extender
AXIS TU8011 4-port PoE Extender add additional PoE ports within a system, allowing for more devices to be connected. In addition to this they also extend the length of PoE cabling that you can use by 100 meters. The new PoE extenders will enhance the ease of installation by minimizing the number of PoE ports used and the amount of cabling needed.
SKU: 7331021082588 -
Accessories, Cables
AXIS TU8010 2-Port PoE Extender
AXIS TU8010 2-port PoE Extender add additional PoE ports within a system, allowing for more devices to be connected. In addition to this they also extend the length of PoE cabling that you can use by 100 meters. The new PoE extenders will enhance the ease of installation by minimizing the number of PoE ports used and the amount of cabling needed.
SKU: 7331021082571 -
Accessories, Midspans
AXIS TU8004 90 W Midspan
AXIS TU8004 is a single port 90 W midspan, compliant with IEEE 802.3bt and High PoE devices. Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for powering network products. In a single network cable, a PoE midspan injects power and data to the network device with built-in PoE support. No need to replace existing Ethernet switches and cabling infrastructure.
SKU: 7331021085367 -
-
Accessories, Cables
AXIS TU8001 Ethernet Surge Protector
AXIS TU8001 Ethernet Surge Protector helps reduce downtime, service and maintenance of your system by shielding your PoE devices against transient voltage spikes in the Ethernet cable. The product protects up to 10 kV surge, with data rates up to 1 Gbps. AXIS TU8001 is IEC 61643-21 complaint and can handle extended temperature ranges. Its compact form factor is ideal for surface or DIN-rail installations, in e.g. electrical cabinets. A high-quality product validated to work seamlessly with Axis devices.
SKU: n/a -
Accessories, Cables
AXIS TU6007-E Cable 8 M 4 Pack
AXIS TU6007-E Cable 8 m 4 Pack is a bulk pack of 4x 8m (26ft) thin cables used for the 2nd generation F-series. AXIS TU6007-E Cable 8m has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021083844 -
Accessories, Cables
AXIS TU6007-E Cable 8 M
AXIS TU6007-E Cable 8 M is a 8 M (26ft) thin cable used for the 2nd generation F-series. AXIS TU6007-E Cable 8m has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021083837 -
Accessories, Cables
AXIS TU6007-E Cable 1 M 4 Pack
AXIS TU6007-E Cable 1m 4P is a bulk pack of 4x 1m (3ft) thin cables used for the 2nd generation F-series. AXIS TU6007-E Cable 1m has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021083868 -
Accessories, Cables
AXIS TU6004-E Cable 8 M
AXIS TU6004-E Cable 8 m is a 8 m cable used for the F-series. It has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021075351 -
-
Accessories
AXIS TS2901 APPLIANCE STAND
Space-saving vertical appliance stand
- Designed, tested and validated for AXIS S2208 & AXIS S2212
- Robust and stable
- Easy to install
- Unobtrusive design
Save space with AXIS TS2901 Appliance Stand. AXIS TS2901 lets you install your AXIS Camera Station appliances vertically when space is limited. Screwing securely onto tables and shelves, it also protects your appliances from theft and falls. AXIS TS2901 is compatible with AXIS Camera Station S2208 Appliance and AXIS Camera Station S2212 Appliance.
SKU: n/a -
Accessories, Mounts
AXIS TQ5001-E Wall & Pole Mount
Wall-and-Pole Mount for Axis PTZ and multi-sensor cameras. Built-in Ethernet cable with an IP66 RJ45 connector for quick installation with protection against dust and water. Connect PoE via either RJ45 or IDC (insulation-displacement contact) connectors.
SKU: 7331021076914 -
Accessories, Mounts
AXIS TQ1602-E Conduit Back Box
IP66/IP67 rated outdoor back box with conduit entrance
- IP66/IP67 storage compartment for connectivity devices
- Impact resistant (IK10+) against vandalism attempts
- ¾ “ / M25 conduit interface from both side and back
- Designed for various Axis bullet cameras
Specifically designed for a several Axis bullet cameras, AXIS TQ1602-E Conduit Back Box is outdoor-ready and impact resistant (IK10+) with an ingress-protected compartment for secure storage of connectivity devices.
SKU: 7331021077034 -
Accessories, Mounts
AXIS TP3603 Conduit Back Box
TP3603 indoor conduit back box a complement to T94S01P at a lower price point for large indoor installations (eg data centers). Compatible with P32/M32 indoor versions as well as indoor versions of Q17/19/29, P33, Q35, and P14/M42(plate needed TP1601). TP3603 has two separate conduit entries (1/2″ & 3/4″) and has space for connectors (e.g. T86 Media Converters & T6101 I/O interface).
SKU: 7331021070967 -
Accessories, Mounts
AXIS TP1001-E Wall & Pole Mount
Wall-and-Pole Mount for Axis PTZ and multi-sensor cameras. Built-in Ethernet cable with an IP66 RJ45 connector for quick installation with protection against dust and water. Connect PoE via either RJ45 or IDC (insulation-displacement contact) connectors.
SKU: 7331021085268 -
Accessories, Mounts
AXIS TD4801 Sunshield 4 Pack
AXIS TD4801 Sunshield is the perfect accessory for when AXIS D4100-E Network Strobe Siren is used in conditions where sunlight would shine directly on the device. It is easy to mount, without the need to take AXIS D4100-E down. The accessory comes in a 4 pack.
SKU: 7331021072510 -
Accessories, Mounts
AXIS T94V01C DUAL CAMERA MOUNT
Back-to-back camera installation made easy
- Save time when installing multiple Axis cameras
- Drill fewer holes in walls
- Compatible with a wide range of Axis cameras and Axis mounts
- Robust design and impact resistant
- Suitable for indoor and outdoor use
SKU: n/a -
Accessories, Mounts
AXIS T94U02D PENDANT KIT
Made in marine grade stainless steel
- Corrosion resistant to seawater and chemicals
- 1.5” NPS
- Outdoor-ready
- Marine grade stainless steel (SS 316L)
- Ideal for stainless steel fixed dome cameras
AXIS T94U02D Pendant Kit is suitable for outdoor environments with a pendant mount made of marine grade, electropolished and coated stainless steel.
SKU: n/a -
Accessories, Mounts
AXIS T94U01D PENDANT KIT
Made in marine grade stainless steel
- Corrosion resistant to seawater and chemicals
- 1.5” NPS
- Outdoor-ready
- Marine grade stainless steel (SS 316L)
- Ideal for stainless steel fixed dome cameras
AXIS T94U01D Pendant Kit is suitable for outdoor environments with a pendant mount made of marine grade, electropolished and coated stainless steel.
SKU: n/a -
Accessories, Mounts
AXIS T94T02D PENDANT KIT
Pendant kit with weather shield
- Weather shield made of impact-, UV-, and heat-resistant polymer
- Outdoor-ready
- Enables use of various mount
- For mounting on 1.5″ NPS threaded brackets
Outdoor pendant kit for selected AXIS M32 Dome Camera Series and AXIS P32 Dome Camera Series.
SKU: n/a -
Accessories, Mounts
AXIS T94S01P Conduit Back Box
IP66/IP67 rated outdoor back box with conduit entrance
- IP66/IP67 storage compartment for connectivity devices
- Impact resistant (IK10+) against vandalism attempts
- ¾ “ / M25 conduit interface from both side and back
- Compatible with a wide range of Axis network cameras
Designed for a wide range of Axis network cameras, AXIS T94S01P Conduit Back Box is outdoor-ready and impact resistant (IK10+) with an ingress-protected compartment for secure storage of connectivity devices.
SKU: 7331021061804 -
-
Accessories, Mounts
AXIS T94N02D Pendant Kit
For AXIS P47 Camera Series
- Indoor and outdoor use
- Fits on poles, parapets, and outer corners
- For mounting on 1.5″ NPS threaded brackets
AXIS T94N02D Pendant Kit allows AXIS P4705-PLVE and AXIS P4707-PLVE Panoramic Cameras to be mounted on poles, parapets and outer corners using 1.5″ NPS threaded brackets.
SKU: 7331021072060 -
-
Accessories, Mounts
AXIS T94N01D Pendant Kit
For indoor and outdoor use
- Indoor and outdoor use
- Enables use of various mounts
- Fits on poles, parapets, and outer corners
- For mounting on 1.5″ NPS threaded brackets
AXIS T94N01D Pendant Kit allows AXIS P37 Network Cameras to be mounted on poles, parapets and outer corners using 1.5″ NPS threaded brackets.
SKU: 7331021064348 -
Accessories, Mounts
AXIS T94M02L RECESSED MOUNT
For roof overhangs and soffits
- Suitable for drop ceilings and soffits
- Indoor and outdoor use
- Quick and easy installation
AXIS T94M02L Recessed Mount is designed for outdoor installations in overhangs and soffits, and has metal back box with a ¾″ (M25) conduit hole.
SKU: n/a -
-
-
Accessories, Mounts
AXIS T94J01A WALL MOUNT GREY
Robust design with cable protection
- Six cable entries
- Flexible cable routing
- Compatible with Axis ACI ¾″ (M25) conduit adapters
- Aluminum
AXIS T94J01A Wall Mount Grey is a robust and impact-resistant wall mount suitable for AXIS Q6215-LE PTZ Network Camera. Cables can be routed through the back or, by using a conduit connection, from each side or from the bottom.
SKU: n/a -
Accessories, Mounts
AXIS T94J01A WALL MOUNT
Robust design with cable protection
- For indoor and outdoor use
- Impact resistant
- Robust and safe
AXIS T94J01A Wall Mount is an aluminum mount suitable for Axis positioning cameras and positioning units. It is compatible with Axis ACI 3/4” conduit adapters, and offers six cable entries. Cables can be routed internally through the back or, by using a conduit connection, from each side or from the bottom. Use with optional accessories for mounting on poles or external corners.
SKU: n/a -
Accessories, Mounts
AXIS T94F01M J-Box/Gang Box Plate
For versatile mounting
- Flexible mounting
- Indoor and outdoor use
- Network cable coupler indoor included
AXIS T94F01M J-Box/Gang Box Plate is used for mounting a camera on 4″ square, 4″ octagon, single-gang, or double-gang junction boxes. It can also be used to mount compatible cameras on AXIS T98A17-VE Surveillance Cabinet, or AXIS T94P01B Corner Mount.
SKU: 7331021004658 -
Accessories, Mounts
AXIS T94F01D PENDANT KIT
Mounting on 1.5″ NPS threaded bracket
- Compatible with various Axis network cameras
- Network Cable Coupler Indoor included
- Enables use of various mounts
Pendant kit for mounting the camera on 1.5″ NPS threaded brackets. Includes Network Cable Coupler Indoor.
SKU: n/a -
Accessories, Mounts
AXIS T94B02D PENDANT KIT
Pendant kit for Axis mounting products
- Indoor use
- Enables use of various mounts
AXIS T94B02D Pendant Kit enables use of Axis mounting products. It has a 1.5″ NPS thread. The kit can also be used with ¾-inch pipes, but then a nut for the pipe thread is required.
SKU: n/a -
Accessories, Mounts
AXIS T94A02L RECESSED MOUNT
Mount for roof overhangs and soffits
- Outdoor-ready
- Suitable for plenum spaces
AXIS T94A02L Recessed Mount is designed for installations in roof overhangs and soffits. The metal back box with a ¾-inch hole for cable protection conduits makes the mount suitable for installations in plenum spaces.
SKU: n/a -
Accessories, Mounts
AXIS T94A02F CEILING BRACKET
For selected Axis PTZ cameras and AXIS Q37 Series
- Indoor and outdoor use
- Suitable for hard ceilings
- Enables use of various mounts
- ¾″ conduit hole on the side
- Aluminum
AXIS T94A02F Ceiling Bracket is compatible with Axis PTZ cameras and AXIS Q37 Series.
SKU: n/a -
Accessories, Mounts
AXIS T91H61 WALL MOUNT
Quick connection and room for more
- Room for devices, midspans and service loop
- Protection against impacts, rain, dust and corrosion
- Built-in RJ45 cable with connector
Designed for fixed dome cameras, AXIS T91H61 Wall Mount accommodates and safely protects accessories inside the mount. You can connect the power and data quickly and easily thanks to the built-in RJ45 cable with connector.
SKU: n/a -
Accessories
AXIS T91G61 WALL MOUNT GREY
Protects against water intrusion
- Waterproof compartment for sensitive parts
- Pre-mounted Ethernet cable
- Quick and easy connection of power and data
AXIS T91G61 Wall Mount Grey is specially designed to accommodate sensitive parts inside the mount, such as midspans and media converters, and protect them against water intrusion. The wall mount has a pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket).
SKU: n/a -
Accessories, Mounts
AXIS T91G61 Wall Mount
Quick connection and room for more
- Room for connectivity devices, midspans and service loop
- Protection against impacts, water, dust and corrosion
- Pre-mounted Ethernet cable with IP66 RJ45 connector
- Re-use existing holes
AXIS T91G61 Wall Mount is specially designed to accommodate and safely protect against water ingress inside the mount, such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data to most of Axis PTZ network cameras.
SKU: n/a -
Accessories, Mounts
AXIS T91F67 POLE MOUNT STAINLESS STEEL
Made of marine grade-stainless steel
- Resistant to seawater and chemicals
- Indoor and outdoor use
- Marine grade stainless steel (SS 316L)
- For pole diameters of 100–410 mm (4–16 in)
- Stainless steel straps (SS 316L) included
AXIS T91F67 Pole Mount is made of marine grade, electropolished and coated stainless steel (SS 316L). This makes the pole mount resistant to impact and corrosion. The mount is ideal for stainless steel fixed dome cameras.
One pair of marine-grade stainless steel (SS316L) straps with TX30 screw interface is included.
SKU: n/a -
Accessories
AXIS T91F61 WALL MOUNT STAINLESS STEEL
Made in marine grade stainless steel
- Resistant to seawater and chemicals
- Suitable for all environments
- Marine grade stainless steel (SS 316L)
- Ideal for stainless steel fixed dome cameras
AXIS T91F61 Wall Mount is made of marine grade, electropolished and coated stainless steel (SS 316L). This makes the pole mount resistant to impact and corrosion.
SKU: n/a -
Accessories, Mounts
AXIS T91E61 WALL MOUNT
For Axis fixed dome pendant kits
- 1.5″ NPS thread
- Flexible cable routing
- Indoor and outdoor use
- Aluminum
AXIS T91E61 Wall Mount is compatible with Axis fixed dome pendant kits. The cables can be routed through the back or externally via the cut-outs at the base of the wall mount.
SKU: n/a -
Accessories, Mounts
AXIS T91D62 TELESCOPIC PARAPET MNT
Parapet installation with telescopic flexibility
- Adjustable length, telescopic arm
- Swivel – easy to install and maintain
- Corrosion protected
- Installation flexibility: parapet and wall
Being the first telescopic parapet on the market, AXIS T91D62 Telescopic Parapet Mount helps installer to adjust the arm length of the mount. This is useful when the camera needs to see above thick parapets or any obstructive elements on the facade of the building. You can connect the Ethernet cable to an RJ45 connector grip at either end of the internal fish tape to pull the Ethernet cable through the pipe.
SKU: n/a -
Accessories, Mounts
AXIS T91D62 ADAPTER MOUNTING BRACKET
For retrofit of camera mounts from other brands
- Robust and sturdy
- Flexible and easy installation
- Reuses PTZ dome parapet mounts from select third-party brands
AXIS T91D62 Adapter Mount Bracket is useful in retrofitting camera installations whilst reusing mounts for PTZ dome parapet mounts of a few other brands.
SKU: n/a -
Accessories, Mounts
AXIS T91D61 Wall Mount
Wall mount with 1.5″ NPS thread
- Flexible cable routing
- AXIS T91A6 Pipe Seal included
- Aluminum
AXIS T91D61 Wall Mount 1.5” NPS is compatible with Axis fixed dome pendant kits and ACI ¾″ conduit adapters. The cables can be routed through the back or from the side using a conduit connection.
SKU: n/a -
-
Accessories, Mounts
AXIS T91B63 CEILING MOUNT
Robust and safe installation
- Indoor and outdoor use
- IK10 rating
- Easy to install
- Flexible cable routing
- Aluminum
AXIS T91B63 Ceiling Mount includes a removable AXIS T94A01D Pendant Kit* and AXIS T91A6 Pipe Seal. The mount is compatible with Axis pendant kits with 1.5″ NPS or NPT inner thread and ACI ¾″ conduit adapters. The cables can be routed through the back, or from the side by using a conduit connection.
SKU: n/a -
Accessories
AXIS T91B57 POLE MOUNT GREY
For sturdy installations of Axis grey cameras
- Indoor and outdoor use
- IK10 rating
- Cable gasket to prevent insect infestation
- For pole diameters of 100–410 mm (4–16 in)
- Aluminum
AXIS T91B57 Pole Mount Grey is a versatile and robust pole mount that can be used under harsh outdoor conditions. It is designed for use with selected AXIS T91 Wall Mounts and AXIS T98A Cabinet Series.
One pair of AXIS Stainless Steel Straps 1450 mm (57 in) with TX30 screw interface is included.
SKU: n/a -
Accessories, Mounts
AXIS T91B57 Pole Mount 100-410 MM
Aluminum Pole Mount for indoor and outdoor installations, for poles with diameter between 100-410 mm (4″-16”). Includes 1 pair of AXIS Stainless Steel Straps 1450mm (57″) with TX30 screw interface for ease-of-installation.
For sturdy installations on poles
- Indoor and outdoor use
- Impact-resistant to prevent vandalism (IK10)
- Cable gasket to prevent insect infestation
- Robust and safe
SKU: n/a -
Accessories, Mounts
AXIS T91B53 TELESCOPIC CEIL MNT 2P
For affordable and flexible ceiling installations
- Suitable for indoor use
- Perfect for retail and commercial environment
- Extendable between 1 to 1.8 m (3.2 to 6 ft)
- Lightweight and robust
AXIS T91B53 Telescopic Ceiling Mount is compatible with Axis pendant kits and camera holders with 3/4” NPS thread.
SKU: n/a -
Accessories, Mounts
AXIS T91B51 Ceiling Mount
Ceiling mount with swivel action for low-ceilinged environments
- For outdoor and indoor
- Swivel action
- Robust and safe
- Vandal and corrosion resistant: IK10- and NEMA 4X-rate
AXIS T91B51 Ceiling Mount is compatible with all Axis PTZ dome cameras and outdoor models of Axis fixed domes.
SKU: 7331021051553 -
Accessories, Mounts
AXIS T91B50 TELESCOPIC CEILING MOUNT
Telescopic ceiling mount with swivel action
- For outdoor and indoor
- Adjustable length
- Swivel action
- Robust and safe
- Vandal and corrosion resistant: IK10- and NEMA 4X-rated
AXIS T91B50 Telescopic Ceiling Mount is compatible with all Axis PTZ dome cameras and outdoor models of Axis fixed domes.
SKU: n/a -
Accessories, Mounts
AXIS T91B47 50-150 MM Mount
AXIS T91B47 Pole Mount for indoor and outdoor installations, for poles with diameter between 50-150mm (2″-6″). Includes 1 pair of AXIS Stainless Steel Straps 570mm (22.5″) with TX30 screw interface for ease-of-installation. AXIS T91B47 is directly compatible with a wide range of Axis cameras.
- Suitable for wide range of pole diameters
- Safe and easy to install
- IK10-rated vandal resistance
- NEMA 4X-rated corrosion protection
- Axis stainless steel straps included
SKU: 7331021061255 -
Accessories, Mounts
AXIS T91B47 100-410 MM Mount
AXIS T91B47 Pole Mount for indoor and outdoor installations, for poles with diameter between 100-410 mm (4″-16”). Includes 1 pair of AXIS Stainless Steel Straps 1450 mm (57″) with TX30 screw interface for ease-of-installation. AXIS T91B47 is directly compatible with a wide range of Axis cameras.
- Suitable for wide range of pole diameters
- Safe and easy to install
- IK10-rated vandal resistance
- NEMA 4X-rated corrosion protection
- Axis stainless steel straps included
SKU: 7331021061248 -
Accessories
AXIS T91A27 POLE MOUNT 10PCS
For cameras with standard tripod thread
- Stainless steel
- Sold in packs of 10
- Straps not included
AXIS T91A27 Pole Mount is compatible with cameras with standard UNC thread. When used together with AXIS T94B01P Conduit Back Box, the pole mount is also compatible with several other Axis network cameras.
SKU: n/a -
Accessories, Mounts
AXIS T91A03 DIN Rail Clip A
Standard DIN mounting clip
- Quick and easy installation
- For standard 35 mm DIN rail
- Mounting plate and screws included
- Sold in packs of five
DIN rail mounting clip for standard 35mm DIN rail. Inlcudes mounting plate and screws for attaching the device.
SKU: n/a -
-
Accessories, Network Switches
AXIS T8524 PoE+ Network Switch
PoE+ managed gigabit network switch, optimized for Axis network products. 2 SFP/RJ45 uplink ports and 24 PoE+ ports with 370W power supply. Built in DCHP server for plug-and-play camera setup. Easy system configuration for effective installation of Axis network products.
SKU: n/a -
Accessories, Network Switches
AXIS T8516 PoE+ Network Switch
PoE+ managed gigabit network switch, optimized for Axis network products. 2 SFP/RJ45 uplink ports and 16 PoE+ ports with 250W power supply. Built in DCHP server for plug-and-play camera setup. Easy system configuration for effective installation of Axis network products.
SKU: 7331021055308 -
Accessories, Network Switches
AXIS T8508 PoE+ Network Switch
PoE+ managed fanless gigabit network switch, optimized for Axis network products. 2 SFP/RJ45 uplink ports and 8 PoE+ ports with 130W power supply. Built in DCHP server for plug-and-play camera setup. Easy system configuration for effective installation of Axis network products.
SKU: n/a -
-
Accessories, Network Switches
AXIS T8504-E Outdoor PoE Switch
Outdoor 4-port managed PoE switch for surveillance applications. 4 PoE ports with up to 60W PoE per port and one SFP port for uplink. Robust metal enclosure with wide temperature range , IP67 and surge protection for demanding installations. Managed switch for remote configuration and management.
SKU: 7331021063488 -
-
-
Accessories, Cables
AXIS T8129-E Outdoor PoE Extender
Robust, outdoor-ready solution for covering distances
- Extends Ethernet and PoE connections beyond the 100m (328 ft.) limit
- No additional power supply is required
- IEEE 802.3af, IEEE 802.3at and High PoE 60 W compatible
- Rugged, IP66/IP67-rated enclosure
- Full-rate network throughout the whole extended distance
SKU: n/a -
-
Accessories, Memory Cards
AXIS Surveillance Card 1 TB
High endurance microSDXC™ card
- Optimized for surveillance cameras
- Endurance, made to last
- Health monitoring ready
- SD card adapter included
- Axis 5-year warranty
AXIS Surveillance Card 1 TB is a high performing edge storage solution optimized for video surveillance. Edge storage enables flexible storage solutions such as de-centralized video recording and may eliminate the need of an onsite server, DVR or NVR.
SKU: 7331021076457 -
Accessories, Mounts
AXIS Steel Straps TX30 570 MM 1 Pair
1 pair marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease-of-installation. Length 570mm (22.5″). Width 14.3mm (0.57″). Thickness 0.68mm (0.03″). Compatible with a wide range of Axis pole mounts. Pole diameter range 50-150mm (2″-6″) when used with AXIS T91B47 Pole Mount.
SKU: 7331021063723 -
Accessories, Mounts
AXIS Steel Straps TX30 1450 MM 1 Pair
1 pair marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease-of-installation. Length 1450mm (57″). Width 14.3mm (0.57″). Thickness 0.68mm (0.03″). Compatible with a wide range of Axis pole mounts. Pole diameter range 100-410mm (4″-16″) when used with AXIS T91B47 Pole Mount.
SKU: 7331021063716 -
Accessories, Network Switches
AXIS D8004 Unmanaged PoE Switch
AXIS D8004 Unmanged PoE Switch is a 4 channel 10/100 Mbps PoE+ switch with plug & play installation. The unmanaged switch comes with a 60 W power budget and is perfect as an entry-level switch for small systems with PoE requirements.
SKU: n/a -
Accessories, AXIS Audio, Cables
AXIS D3110 Connectivity Hub
AXIS D3110 gives sensor and audio capabilities to network video systems or other IoT systems that do not have them or need additional ones. The product comes with 2x Audio IN, Audio Out, 8x Configurable I/Os, Relay and RS485/422. The product can be Powered over Ethernet or through DC. AXIS D3110 supports MQTT, Vapix® and SIP. The product comes with Built-in cybersecurity functionality preventing unauthorized access.
SKU: 7331021075139 -
Accessories, Radar
AXIS D2210-VE Radar White
AXIS D2210-VE Security Radar, White front. 61.0–61.5 GHz, FMCW, for pole and wall mount. Reliable 95 degrees horizontal field of detection 24/7 with built-in analytics including classification of humans and vehicles. Optimized for both area monitoring and traffic monitoring.
SKU: 7331021086753 -
Accessories, Radar
AXIS D2210-VE Radar Black
AXIS D2210-VE Security Radar, Black front. 61.0–61.5 GHz, FMCW, for pole and wall mount. Reliable 95 degrees horizontal field of detection 24/7 with built-in analytics including classification of humans and vehicles. Optimized for both area monitoring and traffic monitoring.
SKU: 7331021083646 -
Accessories, Radar
AXIS D2110-VE Security Radar
AXIS D2110-VE Security Radar, 24.05–24.25 GHz, FMCW, for wall mounting outdoor. Reliable 180 degrees horizontal field of detection 24/7 with built-in analytics including classification of humans and vehicles. Complement to video surveillance enables filtering on distance, customized detection zones, and auto-tracking for PTZ cameras.
SKU: n/a -
-
Accessories, Mounts
AXIS ACI CONDUIT ADAPTER 1/2″-3/4″ A 2P
Step-up ACI adapter
- Part of the Axis Conduit Interface (ACI)
- Anti-loss screws and spring clip included
- Compatible with selected AXIS P37 and Q35 Cameras
Step-up adapter for attaching ¾″ conduits or M25 pipes to Axis products with a ½″ conduit Interface.
SKU: n/a -
-
-
Access Control, Accessories, Controls
AXIS A9910 I/O Relay Expansion Module
Featuring multi-drop technology, it’s possible to connect up to 16 AXIS A9910 I/O Relay Expansion Modules to one AXIS A9210 device. 128 I/Os and 64 relays using just one PoE cable—no need for an extra network cable drop.
SKU: 7331021085497 -
Access Control, Accessories, Controls
AXIS A9210 NETWORK I/O RELAY MODULE
With ten I/O ports and one form C relay, AXIS A9210 offers an easy and cost-efficient way to extend the capabilities of your security system. It offers easy integration with an Axis end-to-end system and other systems in your building.
SKU: n/a -
Access Control, Accessories, Controls
AXIS A9188-VE NETWORK I/O RELAY MODULE
Intelligent, outdoor-ready module
- 8 I/Os with supervised inputs and configurable levels
- 12 and 24 V DC output & PoE+, PoE or 12 and 24 V DC input
- 8 form C relays
- Based on Axis open protocols – VAPIX® and ACAP
- Comes with AXIS T98A cabinet for outdoor use
SKU: n/a -
